3.2. Procedure of installation
Last updated
Last updated
Insert a DVD into the computer to start installing
When "boot:" appears on the screen below, press Enterto go on to the next.
Decide whether or not to test the media.
Press Tab key to move to [Skip]. Press [Enter] to go on to the next.
X Window System comes to run and the keyboard and mouse become active.
Click [Next] when the screen above appears.
Choose a preferred language for instruction:
Choose "English (English)" if you prefer it.
Click on [Next] to go on to the next.
Choose a type of keyboard:
Select the type of keyboard connected to the computer.
An alert message appears to ask whether or not to initialize the hard-disk.
Choose [Yes] to initialize the hard-disk.
Choose a partition to be installed Linux:
Choose [Remove all partitions on selected drives and create default layout].
Click on the [Next], and a warning message will appear.
Click on [Yes] to delete the partitions.
If there is DHCP server such as broadband router on the network, click on [Next].
If it is necessary to allocate an unchanging IP address; or there is no DHCP server on the network, click on [Edit].
Be sure to have the checkbox "Enable IPv4 support" checked.
Choose "Manual configuration".
Fill in the "IP address" and "Prefix (Netmask)", respectively.
Untick the checkbox of "Enable IPv6 support".
Click on [OK].
When it returns to the network device screen, input the hostname.
As shown in the dialog box, input [hostname].[domain name]
For example, hostname.domainname.org
Fill in the Gateway IP address at the "Gateway" field.
Fill in the IP address of DNS at the "Primary DNS" field.
Click on [Next].
Set up the time zone. Click on a preferred location on the map or pulldown menu.
Untick [System clock uses UTC].
Set up a root password (six characters or more)
Be sure to remember the password. Make sure to distinguish between capital letters and small letters.
Asked to enter the password twice for confirmation.
Click on [Next].
Untick all the checkboxes.
Click on [Customize now] on the screen below and then [Next].
Choose "Desktop Environments" and untick the other checkboxes.
Choose "Applications", and untick the other checkboxes.
Choose "Development", and untick the other checkboxes.
Choose "Servers", and untick the other checkboxes.
Choose "Base System", and untick the other checkboxes.
Choose "Virtualization", and untick the other checkboxes.
Choose "Clustering", and untick the other checkboxes.
Choose "Cluster Storage", and untick the other checkboxes.
Choose "Languages", and check a preferred language.
Untick the others
Click on the [Next]
Click on [Next] on the following screen, and it will start installation.
The time required for the installation depends on the computer's performance.
When the screen shows as the following, take out the DVD and click on [Restart]
